# Other A&H Products **URL:** https://forums.allen-heath.com/c/other-ah-products/12.md [Latest](https://forums.allen-heath.com/latest.md) · [Categories](https://forums.allen-heath.com/categories.md) · [Tags](https://forums.allen-heath.com/tags.md) --- ## [ZED 6 power supply issue](https://forums.allen-heath.com/t/zed-6-power-supply-issue/11533)
**Author:** [@msimanek](https://forums.allen-heath.com/u/msimanek)\ **Replies:** 57\ **Last updated:** [6 October 2026 09:32 UTC](https://forums.allen-heath.com/t/zed-6-power-supply-issue/11533 "2026-10-06T09:32:35Z")
ZED 6 is nice compact mixer, but its switching power supply contains few design flaws. These results in psu fail after not so long runtime. If somebody has this problem, I can share solution. --- ## [ML3000 Mutes on each channel not working](https://forums.allen-heath.com/t/ml3000-mutes-on-each-channel-not-working/32768)
**Author:** [@Shultzee13](https://forums.allen-heath.com/u/Shultzee13)\ **Replies:** 0\ **Last updated:** [20 August 2026 18:10 UTC](https://forums.allen-heath.com/t/ml3000-mutes-on-each-channel-not-working/32768 "2026-08-20T18:10:08Z")
I cannot get the mute button to work on each channel. I bought this console used. I believe i might have some old settings I need to clean out from the previous owner. I have held down assign, view and midi at the same t… --- ## [DT20 DHCP problem](https://forums.allen-heath.com/t/dt20-dhcp-problem/32713)
**Author:** [@jluszczek](https://forums.allen-heath.com/u/jluszczek)\ **Replies:** 6\ **Last updated:** [14 August 2026 17:13 UTC](https://forums.allen-heath.com/t/dt20-dhcp-problem/32713 "2026-08-14T17:13:24Z")
I recently bought the DT20 dual mic pre to Dante interface. It works perfectly audio wise, but I ran into a DHCP issue. It will not accept an IP address from the router it’s plugged in. I tried two different networks to … --- ## [SQ, SQ+ Mix to PAFL Ext In](https://forums.allen-heath.com/t/sq-sq-mix-to-pafl-ext-in/32666)
**Author:** [@DVitte](https://forums.allen-heath.com/u/DVitte)\ **Replies:** 1\ **Last updated:** [7 August 2026 23:26 UTC](https://forums.allen-heath.com/t/sq-sq-mix-to-pafl-ext-in/32666 "2026-08-07T23:26:59Z")
Hello! It is not possible to route a mix to PAFL as in dLive and Avantis. We understand that SQ+ is not the top-of-the-line console, but Mix to PAFL is necessary for most shows intercommunication monitor applications. W… --- ## [IP 16 Control Surface](https://forums.allen-heath.com/t/ip-16-control-surface/32606)
**Author:** [@muscanto](https://forums.allen-heath.com/u/muscanto)\ **Replies:** 4\ **Last updated:** [3 August 2026 12:57 UTC](https://forums.allen-heath.com/t/ip-16-control-surface/32606 "2026-08-03T12:57:51Z")
I would love to see an IP 16 control surface that fits into a 19" Rack form factor for mounting in a mixer road case. I would pair this with a mini computer or laptop for running director and controlling a dLive mixrac… --- ## [Dante and AES70 Control](https://forums.allen-heath.com/t/dante-and-aes70-control/32572)
**Author:** [@palmeriain](https://forums.allen-heath.com/u/palmeriain)\ **Replies:** 0\ **Last updated:** [24 July 2026 07:58 UTC](https://forums.allen-heath.com/t/dante-and-aes70-control/32572 "2026-07-24T07:58:46Z")
Would be wonderful if the Dante-equipped stageboxes and consoles would embrace AES70 control architecture, such as pre-amp and phantom power. Does A&H have a roadmap for this? --- ## [ZED-6: Synth only works with Hi-Z](https://forums.allen-heath.com/t/zed-6-synth-only-works-with-hi-z/32548)
**Author:** [@Loverock](https://forums.allen-heath.com/u/Loverock)\ **Replies:** 0\ **Last updated:** [20 July 2026 08:08 UTC](https://forums.allen-heath.com/t/zed-6-synth-only-works-with-hi-z/32548 "2026-07-20T08:08:43Z")
ZED-6: Synth only works with Hi-Z I’m wondering if this behavior is normal or if there might be something wrong with my Allen & Heath ZED-6. My Novation Bass Station II is connected to one of the mono channels using a … --- ## [ZED 10fx noise on FX loop](https://forums.allen-heath.com/t/zed-10fx-noise-on-fx-loop/32496)
**Author:** [@jamesthegold](https://forums.allen-heath.com/u/jamesthegold)\ **Replies:** 0\ **Last updated:** [11 July 2026 11:26 UTC](https://forums.allen-heath.com/t/zed-10fx-noise-on-fx-loop/32496 "2026-07-11T11:26:22Z")
Hi the ZED 10FX works ok along as I do not use the FX The FX work but… they also create noise So without any input you get ( gain and Level on 50%) noise with the used FX I thought it could be the Main FX Poti and … --- ## [ZED60 14FX usb-recording](https://forums.allen-heath.com/t/zed60-14fx-usb-recording/32491)
**Author:** [@Woudi](https://forums.allen-heath.com/u/Woudi)\ **Replies:** 0\ **Last updated:** [10 July 2026 18:57 UTC](https://forums.allen-heath.com/t/zed60-14fx-usb-recording/32491 "2026-07-10T18:57:09Z")
Hallo everyone, maybe you can help me. I’m new using a Zed60 14FX, which is connected to active speakers and an Acer labtop with Windows11, standard Voice-recorder, Cakewalk Sonar. Settings/Sound shows USB audio-codec is… --- ## [Product suggestion: An AB168 Rackkit with pre drilled Neutrik D Series cutouts](https://forums.allen-heath.com/t/product-suggestion-an-ab168-rackkit-with-pre-drilled-neutrik-d-series-cutouts/32489)
**Author:** [@Tristan](https://forums.allen-heath.com/u/Tristan)\ **Replies:** 0\ **Last updated:** [10 July 2026 14:49 UTC](https://forums.allen-heath.com/t/product-suggestion-an-ab168-rackkit-with-pre-drilled-neutrik-d-series-cutouts/32489 "2026-07-10T14:49:21Z")
The other day I ordered a few AB168 Rackkits to mount a couple of AB168 stageboxes in 4U racks, because in the past I’ve seen stageboxes get damaged when they’re used on stage without the protection of a rack. Shortly a… --- ## [DT Preamp Control scenes/presets](https://forums.allen-heath.com/t/dt-preamp-control-scenes-presets/30986)
**Author:** [@PadreAG](https://forums.allen-heath.com/u/PadreAG)\ **Replies:** 4\ **Last updated:** [5 July 2026 14:26 UTC](https://forums.allen-heath.com/t/dt-preamp-control-scenes-presets/30986 "2026-07-05T14:26:43Z")
Hello, Is there any chance we could get a simple scene or preset system on the DT Preamp Control software? The DT168 is a pretty amazing box and since it’s Dante I started used it with other systems as well. However I h… --- ## [GS-R24M preamp repair question](https://forums.allen-heath.com/t/gs-r24m-preamp-repair-question/32440)
**Author:** [@markscrivener](https://forums.allen-heath.com/u/markscrivener)\ **Replies:** 0\ **Last updated:** [4 July 2026 07:01 UTC](https://forums.allen-heath.com/t/gs-r24m-preamp-repair-question/32440 "2026-07-04T07:01:20Z")
My GS-R24M has bad preamps on two channels. The channels work fine from the insert point on and I’ve cleaned and exercised all the preamp switches (Line/Mic, Pol, HP, +48V), so I assume the op amps have died, or perhaps … --- ## [Can we use multi config files for custom control](https://forums.allen-heath.com/t/can-we-use-multi-config-files-for-custom-control/32364)
**Author:** [@rombout](https://forums.allen-heath.com/u/rombout)\ **Replies:** 1\ **Last updated:** [25 June 2026 08:13 UTC](https://forums.allen-heath.com/t/can-we-use-multi-config-files-for-custom-control/32364 "2026-06-25T08:13:37Z")
Hi all, we have a question about custom control and the app. Can we setup different config files for different users as well or does AHM only allow for one config file with different layout in one config file? --- ## [AB168 Power Supply Failure](https://forums.allen-heath.com/t/ab168-power-supply-failure/28760)
**Author:** [@SPOONS](https://forums.allen-heath.com/u/SPOONS)\ **Replies:** 3\ **Last updated:** [4 June 2026 23:27 UTC](https://forums.allen-heath.com/t/ab168-power-supply-failure/28760 "2026-06-04T23:27:15Z")
Greetings. This concerns a failed power supply board on an AB168 stage box. In our church we have an SQ5 desk linked to an AR2412 with an AB168 slaved off it. The system has been up and running for about 20 months. La… --- ## [PA series Digital Out SPDIF Samplerate](https://forums.allen-heath.com/t/pa-series-digital-out-spdif-samplerate/32040)
**Author:** [@partYzone](https://forums.allen-heath.com/u/partYzone)\ **Replies:** 1\ **Last updated:** [14 May 2026 19:37 UTC](https://forums.allen-heath.com/t/pa-series-digital-out-spdif-samplerate/32040 "2026-05-14T19:37:11Z")
What samplerate of PA series mixers (S/PDIF Out), 44,1 or 48kHz or other? Does anybody know? There are no mentions either in the documentation or on the forums. --- ## [DX164-W - DC Powering](https://forums.allen-heath.com/t/dx164-w-dc-powering/31914)
**Author:** [@nmarques](https://forums.allen-heath.com/u/nmarques)\ **Replies:** 1\ **Last updated:** [28 April 2026 13:43 UTC](https://forums.allen-heath.com/t/dx164-w-dc-powering/31914 "2026-04-28T13:43:07Z")
Hello, I’m looking for more info on powering the DX164-W with DC. What is the DC barrel plug size? Does A&H or anyone else have recommended model PSUs? Is there a more precise voltage range given there will be some volt… --- ## [ZED22FX Troubleshooting](https://forums.allen-heath.com/t/zed22fx-troubleshooting/31868)
**Author:** [@Llamagaurd10](https://forums.allen-heath.com/u/Llamagaurd10)\ **Replies:** 0\ **Last updated:** [24 April 2026 04:39 UTC](https://forums.allen-heath.com/t/zed22fx-troubleshooting/31868 "2026-04-24T04:39:17Z")
Hi, I’ve been using a ZED22FX at church for a while now (it’s a 15-year-old desk), and I have also used various ZED and Qu products in other locations. Recently, I’ve been dealing with a repeat issue where the audio dr… --- ## [PA20 Mixer general crackle noise on all channels](https://forums.allen-heath.com/t/pa20-mixer-general-crackle-noise-on-all-channels/31776)
**Author:** [@Mojoampguy](https://forums.allen-heath.com/u/Mojoampguy)\ **Replies:** 0\ **Last updated:** [15 April 2026 15:01 UTC](https://forums.allen-heath.com/t/pa20-mixer-general-crackle-noise-on-all-channels/31776 "2026-04-15T15:01:52Z")
Trying to repair a pa20 unpowered mixer for a local charity group. Basic problem is a crackling noise with nothing connected on both Left and Right outputs (shows up on PFL too. I isolated each channel by disconnecting t… --- ## [Noise on GL2400 Master output](https://forums.allen-heath.com/t/noise-on-gl2400-master-output/30256)
**Author:** [@Midlandsutv](https://forums.allen-heath.com/u/Midlandsutv)\ **Replies:** 8\ **Last updated:** [9 April 2026 16:10 UTC](https://forums.allen-heath.com/t/noise-on-gl2400-master-output/30256 "2026-04-09T16:10:53Z")
Hi, Long time gl2400 user here in home studio. I have a bit of noise (like white noise) fairly low level but still annoying, in the right main output. I have tried different cables, I have de-selected ‘to LR’ on all cha… --- ## [PA28 legacy mixer dry joint / loose connection](https://forums.allen-heath.com/t/pa28-legacy-mixer-dry-joint-loose-connection/31710)
**Author:** [@Reddog](https://forums.allen-heath.com/u/Reddog)\ **Replies:** 0\ **Last updated:** [8 April 2026 11:35 UTC](https://forums.allen-heath.com/t/pa28-legacy-mixer-dry-joint-loose-connection/31710 "2026-04-08T11:35:09Z")
User manual shows it’s pretty easy to lift the top panel. Is the underside of this panel where the connections, specifically main faders and mute switch are? --- ## [Sticky Mute ZED24FX](https://forums.allen-heath.com/t/sticky-mute-zed24fx/31626)
**Author:** [@Steel\_Wolf](https://forums.allen-heath.com/u/Steel_Wolf)\ **Replies:** 1\ **Last updated:** [1 April 2026 18:45 UTC](https://forums.allen-heath.com/t/sticky-mute-zed24fx/31626 "2026-04-01T18:45:42Z")
I have a ZED24FX and for some of the channels the mute button will be in the up position, but still mute the channel. When I wiggle around the physical button it’s self the signal will crackle in and out so I’m assuming … --- ## [AB168 stops working](https://forums.allen-heath.com/t/ab168-stops-working/31636)
**Author:** [@SoliDuke](https://forums.allen-heath.com/u/SoliDuke)\ **Replies:** 0\ **Last updated:** [1 April 2026 09:57 UTC](https://forums.allen-heath.com/t/ab168-stops-working/31636 "2026-04-01T09:57:36Z")
We have an Allen & Heath Qu-7 mixer and two AB168 stage boxes. Last night we had the mixer connected to two AB168 stage boxes in series by S-link cables. The stage box nearest the mixer had two phantom-powered microphone… --- ## [Zedi10fx not powering on](https://forums.allen-heath.com/t/zedi10fx-not-powering-on/31517)
**Author:** [@jshire](https://forums.allen-heath.com/u/jshire)\ **Replies:** 7\ **Last updated:** [31 March 2026 22:12 UTC](https://forums.allen-heath.com/t/zedi10fx-not-powering-on/31517 "2026-03-31T22:12:44Z")
Hi, very lightly used Zedi10fx & today it turned off on its own. Other things connected to the same power circuit didn’t glitch or go off, as would normally happen if there had been a power surge, so not sure what happen… --- ## [GL2 Return 4 not working](https://forums.allen-heath.com/t/gl2-return-4-not-working/31625)
**Author:** [@bdbelly](https://forums.allen-heath.com/u/bdbelly)\ **Replies:** 0\ **Last updated:** [31 March 2026 12:26 UTC](https://forums.allen-heath.com/t/gl2-return-4-not-working/31625 "2026-03-31T12:26:24Z")
I have a GL2 I am working on - return 4 is not passing any signal. Resoldered the jack connections first but that did not solve the problems so I pulled the board that the returns plug in - and checked it over, capacito… --- ## [No sound from main outs to speakers when monitor is plugged into aux 1](https://forums.allen-heath.com/t/no-sound-from-main-outs-to-speakers-when-monitor-is-plugged-into-aux-1/31570)
**Author:** [@Thatbeardyhoor](https://forums.allen-heath.com/u/Thatbeardyhoor)\ **Replies:** 10\ **Last updated:** [31 March 2026 11:40 UTC](https://forums.allen-heath.com/t/no-sound-from-main-outs-to-speakers-when-monitor-is-plugged-into-aux-1/31570 "2026-03-31T11:40:38Z")
when I set up my PA with Kam compact tops and bass bins and my A&H ZED 14 desk , i get no sound to speakers when I plug my monitor into the Aux outputs , when i unplug my monitor, I get sound, I am a newbie to live sound… --- ## [AB168 and DX168 Rack Mount Kit Compatible?](https://forums.allen-heath.com/t/ab168-and-dx168-rack-mount-kit-compatible/31588)
**Author:** [@manusq](https://forums.allen-heath.com/u/manusq)\ **Replies:** 2\ **Last updated:** [27 March 2026 17:31 UTC](https://forums.allen-heath.com/t/ab168-and-dx168-rack-mount-kit-compatible/31588 "2026-03-27T17:31:23Z")
Hi everyone, I am here to ask you a question. I have the DX168 and I want to put it in a rack. My question is if the AB1608-RK19 Rack Mount Kit is compatible with the DX168 or It is just compatible with the AB168 model. … --- ## [Pickoff point for level meters](https://forums.allen-heath.com/t/pickoff-point-for-level-meters/31529)
**Author:** [@Funsystems](https://forums.allen-heath.com/u/Funsystems)\ **Replies:** 7\ **Last updated:** [27 March 2026 15:03 UTC](https://forums.allen-heath.com/t/pickoff-point-for-level-meters/31529 "2026-03-27T15:03:44Z")
When i use meters for groups and matrices i can select a pickoff point post preamp. but when i do i get no signal on the meters, which seems logical because there are no preamps on those. When i select post insert point… --- ## [Red LED Tombstone](https://forums.allen-heath.com/t/red-led-tombstone/31556)
**Author:** [@Nutty](https://forums.allen-heath.com/u/Nutty)\ **Replies:** 0\ **Last updated:** [24 March 2026 13:43 UTC](https://forums.allen-heath.com/t/red-led-tombstone/31556 "2026-03-24T13:43:11Z")
Hi need some help. I have a PA28 in the work shop and need to replace the mute LED. can any one me a link to where I can buy these many thnaks Brian(Nutty) --- ## [PA28 Legacy Mixer - Parametric EQ](https://forums.allen-heath.com/t/pa28-legacy-mixer-parametric-eq/31459)
**Author:** [@bcain](https://forums.allen-heath.com/u/bcain)\ **Replies:** 1\ **Last updated:** [11 March 2026 12:29 UTC](https://forums.allen-heath.com/t/pa28-legacy-mixer-parametric-eq/31459 "2026-03-11T12:29:59Z")
What should be the default settings on the Mains parametric EQ? Reason being is that I have a 16 band EQ running through the inserts and don’t want to over EQ the system. --- ## [32in/16out 96 kHz Expander](https://forums.allen-heath.com/t/32in-16out-96-khz-expander/31292)
**Author:** [@stagesound.si](https://forums.allen-heath.com/u/stagesound.si)\ **Replies:** 12\ **Last updated:** [4 March 2026 14:45 UTC](https://forums.allen-heath.com/t/32in-16out-96-khz-expander/31292 "2026-03-04T14:45:02Z")
Why don’t you finally offer us a 32 channel 96kHz I/O Expander in a compact rack design with front and rear connectors, like the Midas DL32? Such a combination has long been the standard due to its usability and practica… [Next page](https://forums.allen-heath.com/c/other-ah-products/12.md?page=1)