I think the biggest shortcoming of the QU32 and maybe 24 is not putting more mix outs or not making all of what is there mono outs. I would much rather have that than more softkeys or maybe even matrices and DCAs.
Even low end competitors have more. It is hard to please everyone and all have their particular want.
Yes I agree.
However It is early days for the QU24 and QU32.
Maybe A&H will be able to make a sectable patch for people like myself that want more outs in monitor mode?
I don’t know.
However this is what I’ll be using for an awful amount of large bands over 4 nights next week.
Maybe I can talk the distributor here into show casing the ME1s’
Thanks for all feedback.
10 mono mix , it would be great because the ME- 1 cost a lot , even cheaper tables have a number over aux mix , mix 7 really is absurd little to the expectation of QU 24 and 32, less than 01v. Please Allen & Heath, analising this question in next firmware… THANKS Peter Bayer - Banda VP2
wow … old post?
We just used the desk as mono outs even the stereo outs as mono just using one side of each pair.
Used the left and right bus as side fills to the stage.
I still think AS A MONITOR DESK with given software you could use the subgroups as outputs however you cant in its present form as these are relative to the L/R bus, and don’t move as sub-group faders.
I doubt very much this would be implemented.
Its a minority in the grand scheme of marketing with the new dLive arriving soon.
They want you to buy some ME1’s 
Of course if you are looking at this from the FOH perspective, you do have the matrix’s as sends?
However I found using matrix’s live, was slow to get into those tabs to adjust. (too many clicks!) Thats on the desk… maybe the iPad would have been better?
Maybe an assignable soft key function would be good there?
The QU32 is a great desk!
However it is what it is at that price point.
anyhow
food for thought.
10 mono mix and 4fx mix is great.
I’m out of free auxes. Panning stereo mixes is awful. Double tap mix button is much easyer.
I know this is old, but does anyone know if this is an actual DSP limitation? Can’t A&H add this functionality via a future firmware update?
Assuming that we are happy to have the EQ etc shared then it shouldn’t be a DSP limit (might need master volume to be linked as well?)
Would this work?
Assign whichever channels to Grp 1&2 creating a mix. Pan Grp 1&2 hard Left and assign to Mix 5&6. This effectively gets sent mono out of the left side of Mix 5&6.
Create another mix using Grp 3&4 and pan hard Right. Assign to Mix 5&6 and this will be sent out of Mix 6 (the right side of Mix 5&6)
Essentially,
Grp 1&2>Mix 5
Grp 3&4>Mix 6
Grp 5&6>Mix 7
Grp 7&8>Mix 8
Matrix 1&2>Mix 9
Matrix 3&4>Mix 10
I’m going to try this later today unless someone first explains why this wouldn’t work…cheers!
@Phillygtr already discussed here: Qu 10 mono monitor mixes