# AHM Multiple Zones per room

**URL:** <https://forums.allen-heath.com/t/ahm-multiple-zones-per-room/16088>\
**Category:** AHM Feature Suggestions\
**Created:** [11 November 2024 22:05 UTC](https://forums.allen-heath.com/t/ahm-multiple-zones-per-room/16088 "2024-11-11T22:05:14Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![adamsflys](https://avatars.discourse-cdn.com/v4/letter/a/48db29/32.png) [@adamsflys](https://forums.allen-heath.com/u/adamsflys)\
**Post date:** [11 November 2024 22:05 UTC](https://forums.allen-heath.com/t/ahm-multiple-zones-per-room/16088/1 "2024-11-11T22:05:14Z")

</div>

I’d love the ability to have multiple zones be tied to the same “room” so that I can have multiple sets of speakers, such as my Main LR, Out Fills, Front Fills, Delays, etc. all in one “room” so that when I combine multiple rooms so that they share audio, then all of my different zones within one room get combined seamlessly as well.

Currently I’m trying to create a configuration based on rooms (to avoid clunky preset and custom control layout management) that will allow me to have my main auditorium as a “room” and send either a “simple” room into it which has some basic mics and canned audio, and then another “room” which my FOH console is feeding. As it stands right now, I have to create an extra room with a zone that then feeds into the individual speaker zones I’m using to directly control and process my PA. I understand that this would usually be done with a separate DSP that’s just getting fed a main LR signal, but that’s what I’m trying to use the AHM for as well.

Ultimately, I think being able to at least tie a main LR and a sub “zone” to a single room would be incredibly helpful

---

<div class="post-metadata">

**Author:** ![adamsflys](https://avatars.discourse-cdn.com/v4/letter/a/48db29/32.png) [@adamsflys](https://forums.allen-heath.com/u/adamsflys)\
**Post date:** [12 November 2024 14:41 UTC](https://forums.allen-heath.com/t/ahm-multiple-zones-per-room/16088/2 "2024-11-12T14:41:51Z")

</div>

I guess the easier way to set this up would be to allow rooms to be tied to control groups rather than zones, that way I can assign multiple zones to a single control group for an overall “system volume” in a specific room, and also be able to change the source for that room in a single place

---

<div class="post-metadata">

**Author:** ![jtaudioguy](https://avatars.discourse-cdn.com/v4/letter/j/f19dbf/32.png) [@jtaudioguy](https://forums.allen-heath.com/u/jtaudioguy)\
**Post date:** [27 January 2025 00:27 UTC](https://forums.allen-heath.com/t/ahm-multiple-zones-per-room/16088/3 "2025-01-27T00:27:07Z")

</div>

I would like the same feature…