# AHM32 toggle buttons

**URL:** <https://forums.allen-heath.com/t/ahm32-toggle-buttons/16040>\
**Category:** AHM General Discussions\
**Created:** [31 October 2024 09:28 UTC](https://forums.allen-heath.com/t/ahm32-toggle-buttons/16040 "2024-10-31T09:28:47Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![plevrier](https://avatars.discourse-cdn.com/v4/letter/p/53a042/32.png) [@plevrier](https://forums.allen-heath.com/u/plevrier)\
**Post date:** [31 October 2024 09:28 UTC](https://forums.allen-heath.com/t/ahm32-toggle-buttons/16040/1 "2024-10-31T09:28:47Z")

</div>

Hi all,

I am using a AHM to enable / disable FOH mixers to the main PA.

I would feed input 1-3 with LR/Sub

What I would like to achive is:  
Button 1 : Mixer on/off : using LR + Sub  
Button 2 : Mixer on/off : using LR (Sub will be fed by summing LR)

I would fire a preset to do the right actions (change fader positions op crosspoint faders).

My main issue that I can’t put it off when a mixer state is on… The easy solution is a third button to put the mixer off, but that will cost me one button on front.

Is this possible?

regards,  
Pascal