AVANTIS & SHURE

Avantis Avantis Feature Suggestions
1

Hello A&H Tec Team.

are you considering integrating the shure integration from the dlive in the avantis? i like it in the dlive and i it would be grat if that feature would also work in my new Avantis.

Thanks

Clement

2

It’s coming in the next firmware update (1.1). Hopefully in a few weeks.

Check out the preview video that Jack did at NAMM. https://vimeo.com/502714246

Edit - it looks like all of the A&H NAMM videos have been removed.

3

I’m afraid there is a possibility Shure wireless integration will NOT make it into V1.1.
We are looking at the option of adding this feature later, once testing is completed by both companies, and avoid further delays to V1.1.

4

And what about the delay of the dLive firmware?
13 months…??? anyone?

5

This is probably one of my biggest asks. I run a lot of musicals with high wireless channel counts, and we often have to devote a tech just to monitor RF. Even with basic status displays like those implemented on the dLive, it would be a great help!

6

Please add Dante pre amp control for Shure ULXds

7

Do we have any kind of ETA for this feature?

8

Just seen the d-live has know got sennhesier support.

So bumping this up. Please Dante pre amp control and information from Shure ULX ds

9

Our church runs 10 Shure ULXD4 and the integration would be great.
Thanks again.

10

YES PLEASE SHURE ULXD INTEGRATION!!!

THANKS!!!

11

Any indication on this happening?

12

PLEASE PLEASE PLEASE! We need Shure Integration for corporate events. Some events we don’t have the ability or budget to have an A2 and the A1 has to monitor the rach from the console. Since you have it in dLive I hope it will make it to the Avantis. PLEASE PLEASE PLEASE PLEASE PLEASE!

13

Alternatif, ipad with shure channels…

14

I’m pleased to say that Shure ULX-D, QLX-D and Axient Digital integration is included in V1.13.
Announcements will follow shortly.

15

WONDERFUL!!!

Thank you!

16

How is it communicating with the Shure products? Via the control network for the board or through Dante?

Reason I ask is we didn’t go the Dante route for now until those products are more readily available so we have the A&H I/O and no Dante card…

Either way, great news and another item checked off the list for a lot of A1’s.

17

Wow! Wonderful news!

Thank you!!!’

18
How is it communicating with the Shure products?
Via the control network, if it's like dLive.
19

P.S. I’m not sure if you switch on the BRIDGE on the Dante card whether it will also bridge Shure control data over the Dante network or not. Maybe Jack, Nic or someone at A&H can tell you that specifically. I’ve never tried that before.

20

Yes, you can use the network bridge on the Dante card. Jack will post a tutorial video in the next few days, but in the meantime, you can reference the dLive-Shure guide: https://www.allen-heath.com/media/dLive-Shure-Integration-Guide-ISS1.pdf
All the advice in this document applies to Avantis too.