# Channel with USB assigned freezes desk

**URL:** <https://forums.allen-heath.com/t/channel-with-usb-assigned-freezes-desk/33225>\
**Category:** Qu Troubleshooting\
**Created:** [25 October 2026 13:55 UTC](https://forums.allen-heath.com/t/channel-with-usb-assigned-freezes-desk/33225 "2026-10-25T13:55:11Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Deemac](https://sea2.discourse-cdn.com/flex002/user_avatar/forums.allen-heath.com/deemac/32/9422_2.png) [@Deemac](https://forums.allen-heath.com/u/Deemac)\
**Post date:** [25 October 2026 13:55 UTC](https://forums.allen-heath.com/t/channel-with-usb-assigned-freezes-desk/33225/1 "2026-10-25T13:55:11Z")

</div>

QU5 user here. Since installing the latest firmware (1.2) if I go to a channel assigned to the USB pen drive (for playing backing tracks during breaks), if I switch the compressor on that channel on and off and back on the whole desk locks ups. All the switches, LEDs, screen etc. now do nothing. The music will still play from the USB pen drive but the only way to stop it is to hard power the desk down (via the back power switch). If you then power back up all is good again. I will also say after some experimentation, it doesn’t matter what channel I assign the USB to it has the same effect. I have raised a support ticket but wondered if anyone else can replicate this issue?

---

<div class="post-metadata">

**Author:** ![Deemac](https://sea2.discourse-cdn.com/flex002/user_avatar/forums.allen-heath.com/deemac/32/9422_2.png) [@Deemac](https://forums.allen-heath.com/u/Deemac)\
**Post date:** [27 October 2026 13:10 UTC](https://forums.allen-heath.com/t/channel-with-usb-assigned-freezes-desk/33225/2 "2026-10-27T13:10:12Z")

</div>

A&H support come back very quickly and have acknowledged that this is a know issue and are looking at a fix in the future. My immediate fix is just not to use the compressor on the USB assigned channel

---

<div class="post-metadata">

**Author:** ![hnaef](https://avatars.discourse-cdn.com/v4/letter/h/5f9b8f/32.png) [@hnaef](https://forums.allen-heath.com/u/hnaef)\
**Post date:** [7 November 2026 12:15 UTC](https://forums.allen-heath.com/t/channel-with-usb-assigned-freezes-desk/33225/3 "2026-11-07T12:15:01Z")

</div>

Don’t miss the update 1.2.1!

---

<div class="post-metadata">

**Author:** ![Deemac](https://sea2.discourse-cdn.com/flex002/user_avatar/forums.allen-heath.com/deemac/32/9422_2.png) [@Deemac](https://forums.allen-heath.com/u/Deemac)\
**Post date:** [8 November 2026 11:42 UTC](https://forums.allen-heath.com/t/channel-with-usb-assigned-freezes-desk/33225/4 "2026-11-08T11:42:42Z")

</div>

Thanks, A&H support got back to me with this update. I now have it installed and can report all is now good. Great service and response from all at A&H. hnaef - thanks for your message to 🙂
