# Custom IP for controlling Lyntec / 3rd Party Items

**URL:** <https://forums.allen-heath.com/t/custom-ip-for-controlling-lyntec-3rd-party-items/28509>\
**Category:** AHM General Discussions\
**Created:** [18 July 2025 22:42 UTC](https://forums.allen-heath.com/t/custom-ip-for-controlling-lyntec-3rd-party-items/28509 "2025-07-18T22:42:53Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![langaaronm](https://sea2.discourse-cdn.com/flex002/user_avatar/forums.allen-heath.com/langaaronm/32/1338_2.png) [@langaaronm](https://forums.allen-heath.com/u/langaaronm)\
**Post date:** [18 July 2025 22:42 UTC](https://forums.allen-heath.com/t/custom-ip-for-controlling-lyntec-3rd-party-items/28509/1 "2025-07-18T22:42:53Z")

</div>

Has anyone had success controlling third-party devices that require HTTP messages?

I am attempting to add a simple on/off button to our control panel for power sequencing. I’ve done this in other platforms (Symetrix, QSys, Crestron, Ross Dashboard, etc.) with no issue. After 4 hours of beating my head against a wall, trying everything I can think of, I’ve had enough of trying this on my own.

Help would be appreciated.

---

<div class="post-metadata">

**Author:** ![dan-m](https://avatars.discourse-cdn.com/v4/letter/d/da6949/32.png) [@dan-m](https://forums.allen-heath.com/u/dan-m)\
**Post date:** [19 July 2025 02:03 UTC](https://forums.allen-heath.com/t/custom-ip-for-controlling-lyntec-3rd-party-items/28509/2 "2025-07-19T02:03:34Z")

</div>

Might have to do something like a GPIO output.