I use a couple of channels for playback purposes which are ganged together . The problem I find is the faders are stiff when pushed and they tend to fight back when quick adjustments are made. It feels like the motors aren’t happy moving the two together. Any advice on this one? The desk is running 1.53
Hi Doug
When Faders are ganged together only move 1 fader in the gang as the other faders will follow the fader you are moving automatically.
The reason the faders are fighting back is because each fader is trying to follow the level of the other faders in the gang so they are the same level.
If you do not wish to link the faders you can just remove the fader linking attribute in the gang attributes page.
Best Regards
Sam A&H
That makes sense thankyou