# FX OUT to Input Channel

**URL:** <https://forums.allen-heath.com/t/fx-out-to-input-channel/14311>\
**Category:** Avantis General Discussions\
**Created:** [4 January 2024 20:56 UTC](https://forums.allen-heath.com/t/fx-out-to-input-channel/14311 "2024-01-04T20:56:54Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![lobo](https://avatars.discourse-cdn.com/v4/letter/l/76d3ee/32.png) [@lobo](https://forums.allen-heath.com/u/lobo)\
**Post date:** [4 January 2024 20:56 UTC](https://forums.allen-heath.com/t/fx-out-to-input-channel/14311/1 "2024-01-04T20:56:54Z")

</div>

Hi all,

is there any way to route the output of any FX unit tu a normal input channel to have a full featured return channel?  
(Without doing it the old fashioned way using a cable to connect a physical out to a physical in… 😉 )

---

<div class="post-metadata">

**Author:** ![lobo](https://avatars.discourse-cdn.com/v4/letter/l/76d3ee/32.png) [@lobo](https://forums.allen-heath.com/u/lobo)\
**Post date:** [5 January 2024 11:58 UTC](https://forums.allen-heath.com/t/fx-out-to-input-channel/14311/2 "2024-01-05T11:58:43Z")

</div>

ok, I found it… I was searching in the I/O grid and the routing options in the FX unit itself and was not aware, that in the input select of each channel there are some more options to choose from!

---

<div class="post-metadata">

**Author:** ![Bborisss](https://avatars.discourse-cdn.com/v4/letter/b/9f8e36/32.png) [@Bborisss](https://forums.allen-heath.com/u/Bborisss)\
**Post date:** [2 January 2026 16:11 UTC](https://forums.allen-heath.com/t/fx-out-to-input-channel/14311/3 "2026-01-02T16:11:39Z")

</div>

Hello! Could anybody please help me with this on SQ?