# GLD 80 Mix Lights

**URL:** <https://forums.allen-heath.com/t/gld-80-mix-lights/9444>\
**Category:** GLD Troubleshooting\
**Created:** [18 February 2020 12:24 UTC](https://forums.allen-heath.com/t/gld-80-mix-lights/9444 "2020-02-18T12:24:48Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![kelquadrantgmail-com](https://avatars.discourse-cdn.com/v4/letter/k/f1d935/32.png) [@kelquadrantgmail-com](https://forums.allen-heath.com/u/kelquadrantgmail-com)\
**Post date:** [18 February 2020 12:24 UTC](https://forums.allen-heath.com/t/gld-80-mix-lights/9444/1 "2020-02-18T12:24:48Z")

</div>

Hi there, sorry if this is a stupid question,

Is there any reason why the mix indicators on all the input channels stay lit, no matter which mix destination is selected?

GLD 80 Firmware V1.61 Rev 38134

Thanks in advance

---

<div class="post-metadata">

**Author:** ![steffenromeiss](https://sea2.discourse-cdn.com/flex002/user_avatar/forums.allen-heath.com/steffenromeiss/32/2684_2.png) [@steffenromeiss](https://forums.allen-heath.com/u/steffenromeiss)\
**Post date:** [18 February 2020 12:34 UTC](https://forums.allen-heath.com/t/gld-80-mix-lights/9444/2 "2020-02-18T12:34:15Z")

</div>

sounds like a fault in the hardware  
contact your dealer

---

<div class="post-metadata">

**Author:** ![kelquadrantgmail-com](https://avatars.discourse-cdn.com/v4/letter/k/f1d935/32.png) [@kelquadrantgmail-com](https://forums.allen-heath.com/u/kelquadrantgmail-com)\
**Post date:** [18 February 2020 14:08 UTC](https://forums.allen-heath.com/t/gld-80-mix-lights/9444/3 "2020-02-18T14:08:05Z")

</div>

Fixed it, Ribbon cable to that board wasn’t seated properly. Classic.