# LED Display in Fader Flip Mode

**URL:** <https://forums.allen-heath.com/t/led-display-in-fader-flip-mode/2815>\
**Category:** Qu General Discussions\
**Created:** [2 June 2014 16:42 UTC](https://forums.allen-heath.com/t/led-display-in-fader-flip-mode/2815 "2014-06-02T16:42:57Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![mamerica](https://sea2.discourse-cdn.com/flex002/user_avatar/forums.allen-heath.com/mamerica/32/1652_2.png) [@mamerica](https://forums.allen-heath.com/u/mamerica)\
**Post date:** [2 June 2014 16:42 UTC](https://forums.allen-heath.com/t/led-display-in-fader-flip-mode/2815/1 "2014-06-02T16:42:57Z")

</div>

I was at my friend’s house on Thursday. He was playing some music through his Qu-16 ST-3. When he went into Fader-Flip Mode (for the main output), the LED’s corresponding to the frequencies started flashing.

The next day I was setting up to use my board to use my Qu-16 as a monitor mixer. When I used Fader-Flip Mode (on Aux-1) to set the wedges, I didn’t get any LED action. We are both using Firmware 1.4

Is that feature only available when the main output is selected?

---

<div class="post-metadata">

**Author:** ![mervaka](https://avatars.discourse-cdn.com/v4/letter/m/b77776/32.png) [@mervaka](https://forums.allen-heath.com/u/mervaka)\
**Post date:** [2 June 2014 19:35 UTC](https://forums.allen-heath.com/t/led-display-in-fader-flip-mode/2815/2 "2014-06-02T19:35:26Z")

</div>

It needs to also be PAFLed. It’s the same RTA information as from the RTA screen.