# Meters not Matching in bank and processing views **URL:** \ **Category:** Avantis Troubleshooting\ **Created:** [30 September 2025 14:00 UTC](https://forums.allen-heath.com/t/meters-not-matching-in-bank-and-processing-views/29850 "2025-09-30T14:00:46Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![bmwpgh](https://avatars.discourse-cdn.com/v4/letter/b/ed655f/32.png) [@bmwpgh](https://forums.allen-heath.com/u/bmwpgh)\ **Post date:** [30 September 2025 14:00 UTC](https://forums.allen-heath.com/t/meters-not-matching-in-bank-and-processing-views/29850/1 "2025-09-30T14:00:46Z")
The meters on my Avantis are very inconsistent. If I look at the meter in each channel at the bottom of the screen and then click on a processing page for a channel, the page shows the meters in the yellow and yet on the bank view at the bottom of the screen, the meter is barely even showing (like a very weak signal). This doesn’t happen all the time or on every channel, but trying to set gains can be difficult when it does occur. Any easy answers??? Is there a way to reset? ---
**Author:** ![Brian-1](https://sea2.discourse-cdn.com/flex002/user_avatar/forums.allen-heath.com/brian-1/32/4395_2.png) [@Brian-1](https://forums.allen-heath.com/u/Brian-1)\ **Post date:** [30 September 2025 16:45 UTC](https://forums.allen-heath.com/t/meters-not-matching-in-bank-and-processing-views/29850/2 "2025-09-30T16:45:51Z")
If you go to the settings for Audio/Metering, you can reset the parameters there. Perhaps something got changed off of default at some point. ![image](https://us1.discourse-cdn.com/flex002/uploads/allenheathdigitalcommunity/original/2X/3/342ef7afdf9fe57bf534664d140a6a1d75c110d3.png) ---
**Author:** ![bmwpgh](https://avatars.discourse-cdn.com/v4/letter/b/ed655f/32.png) [@bmwpgh](https://forums.allen-heath.com/u/bmwpgh)\ **Post date:** [6 October 2025 15:25 UTC](https://forums.allen-heath.com/t/meters-not-matching-in-bank-and-processing-views/29850/3 "2025-10-06T15:25:10Z")
I did that. Reset everything twice. No change.