# Mixing monitor sends...?

**URL:** <https://forums.allen-heath.com/t/mixing-monitor-sends/25842>\
**Category:** CQ General Discussions\
**Created:** [31 March 2025 15:31 UTC](https://forums.allen-heath.com/t/mixing-monitor-sends/25842 "2025-03-31T15:31:35Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![bjork57](https://avatars.discourse-cdn.com/v4/letter/b/58f4c7/32.png) [@bjork57](https://forums.allen-heath.com/u/bjork57)\
**Post date:** [31 March 2025 15:31 UTC](https://forums.allen-heath.com/t/mixing-monitor-sends/25842/1 "2025-03-31T15:31:35Z")

</div>

I know I can view and adjust an input’s send levels to the various output channels, but I’m not finding a way to reverse that, that is to view and change those input levels in an output channel view.  
I’m seeking a way to mix my monitor sends (outputs) via a sends channel view.  
(CQ-12T)

---

<div class="post-metadata">

**Author:** ![Brian-1](https://sea2.discourse-cdn.com/flex002/user_avatar/forums.allen-heath.com/brian-1/32/4395_2.png) [@Brian-1](https://forums.allen-heath.com/u/Brian-1)\
**Post date:** [31 March 2025 15:57 UTC](https://forums.allen-heath.com/t/mixing-monitor-sends/25842/2 "2025-03-31T15:57:49Z")

</div>

Page 42-43 of the CQ user guide…

It walks you through both ways to change the send level - either at the channel level with every aux send listed, or at the aux level with every channel listed.

---

<div class="post-metadata">

**Author:** ![bjork57](https://avatars.discourse-cdn.com/v4/letter/b/58f4c7/32.png) [@bjork57](https://forums.allen-heath.com/u/bjork57)\
**Post date:** [31 March 2025 16:56 UTC](https://forums.allen-heath.com/t/mixing-monitor-sends/25842/3 "2025-03-31T16:56:48Z")

</div>

Thanks. I will review those instructions.