# OSC Commands & QLab **URL:** \ **Category:** Avantis General Discussions\ **Created:** [28 April 2020 03:00 UTC](https://forums.allen-heath.com/t/osc-commands-qlab/9688 "2020-04-28T03:00:15Z")\ **Posts on this page:** 10\ **Page:** 1
**Author:** ![synergismsteve](https://sea2.discourse-cdn.com/flex002/user_avatar/forums.allen-heath.com/synergismsteve/32/2146_2.png) [@synergismsteve](https://forums.allen-heath.com/u/synergismsteve)\ **Post date:** [28 April 2020 03:00 UTC](https://forums.allen-heath.com/t/osc-commands-qlab/9688/1 "2020-04-28T03:00:15Z")
Hey Everyone, Graduating from the Behringer X32 to a new Allen & Heath Avantis this Summer. I have volunteers on my church production team and therefore need to take away guesswork on some settings. Using the X32, there was a whole slew of support for OSC Commands into the device. Therefore, sending commands to mute faders, and do slow crossfades through QLab software was never a problem. How can I send automation commands to an Avantis using QLab software? Thanks for your support! Steve ---
**Author:** ![NicB](https://sea2.discourse-cdn.com/flex002/user_avatar/forums.allen-heath.com/nicb/32/4389_2.png) [@NicB](https://forums.allen-heath.com/u/NicB)\ **Post date:** [28 April 2020 07:32 UTC](https://forums.allen-heath.com/t/osc-commands-qlab/9688/2 "2020-04-28T07:32:27Z")
Hi Steve, Check out our DAW Control driver: [https://www.allen-heath.com/daw-control/](https://www.allen-heath.com/daw-control/) Not yet tested and supported on Avantis, but it will be soon. DAW Control will create virtual MIDI ports on your computer and provides several maps for different applications, including a ‘CC Translator’ map that can be used to automate Input or Mix channels from QLab with individual crossfades, mutes etc. ---
**Author:** ![synergismsteve](https://sea2.discourse-cdn.com/flex002/user_avatar/forums.allen-heath.com/synergismsteve/32/2146_2.png) [@synergismsteve](https://forums.allen-heath.com/u/synergismsteve)\ **Post date:** [9 September 2020 18:34 UTC](https://forums.allen-heath.com/t/osc-commands-qlab/9688/3 "2020-09-09T18:34:36Z")
Thanks Nicola, I appreciate and understand the MIDI protocol for DAW Control. What I am looking to do is send OSC Commands so that I can declare things like, “Unmute Channel 16 Fader” as one type of OSC Command but also send commands like this “Start from 0 and raise the fader to -10dB over 5 sec” This is possible to send with QLab over OSC Commands. I just need to know where I can get the list of OSC Commands like I used with Behringer products. Thanks again! ---
**Author:** ![NicB](https://sea2.discourse-cdn.com/flex002/user_avatar/forums.allen-heath.com/nicb/32/4389_2.png) [@NicB](https://forums.allen-heath.com/u/NicB)\ **Post date:** [10 September 2020 07:42 UTC](https://forums.allen-heath.com/t/osc-commands-qlab/9688/4 "2020-09-10T07:42:26Z")
Hi Steve, We don’t support OSC. However the functions you are describing can both be achieved with the DAW Control driver. The fader automation can be set in QLab either by using the MIDI Thru map and the NRPN fader level messages (as described in the MIDI protocol for dLive and soon to be published for Avantis), or by using the CC Translator map which should make mapping easier and multiple channel fades possible at the same time. If you need help programming QLab, open a ticket at [support.allen-heath.com](http://support.allen-heath.com) and our Support team will be happy to assist. ---
**Author:** ![Deleted.User](https://sea2.discourse-cdn.com/flex002/user_avatar/forums.allen-heath.com/deleted.user/32/4433_2.png) [@Deleted.User](https://forums.allen-heath.com/u/Deleted.User)\ **Post date:** [13 October 2020 21:59 UTC](https://forums.allen-heath.com/t/osc-commands-qlab/9688/5 "2020-10-13T21:59:58Z")
I can’t find the Avantis MIDI/TCP protocol information, like the ones available for the iLive/dLive/SQ, etc. Where would I find that document? ---
**Author:** ![Brian-1](https://sea2.discourse-cdn.com/flex002/user_avatar/forums.allen-heath.com/brian-1/32/4395_2.png) [@Brian-1](https://forums.allen-heath.com/u/Brian-1)\ **Post date:** [21 October 2020 13:11 UTC](https://forums.allen-heath.com/t/osc-commands-qlab/9688/6 "2020-10-21T13:11:27Z")
I believe the software is the same for all devices (although the commands are different between some devices). Main page is here and includes a link to the help documentation. [https://www.allen-heath.com/midi-control/](https://www.allen-heath.com/midi-control/) ---
**Author:** ![kevg](https://avatars.discourse-cdn.com/v4/letter/k/0ea827/32.png) [@kevg](https://forums.allen-heath.com/u/kevg)\ **Post date:** [18 May 2022 11:20 UTC](https://forums.allen-heath.com/t/osc-commands-qlab/9688/7 "2022-05-18T11:20:44Z")
Got to say it is a shame that OSC isn’t supported. Such a useful protocol and plenty of 3rd party apps out there to do cleaver things. Every lighting console has jumped onto it, strange the audio market is slow on the uptake ---
**Author:** ![davidgiga1993](https://sea2.discourse-cdn.com/flex002/user_avatar/forums.allen-heath.com/davidgiga1993/32/2816_2.png) [@davidgiga1993](https://forums.allen-heath.com/u/davidgiga1993)\ **Post date:** [18 May 2022 12:02 UTC](https://forums.allen-heath.com/t/osc-commands-qlab/9688/8 "2022-05-18T12:02:27Z")
You could use Mixing Station as a translator. It supports OSC and REST API for nearly all channel parameters. ---
**Author:** ![tatsuya](https://sea2.discourse-cdn.com/flex002/user_avatar/forums.allen-heath.com/tatsuya/32/2375_2.png) [@tatsuya](https://forums.allen-heath.com/u/tatsuya)\ **Post date:** [19 September 2024 10:41 UTC](https://forums.allen-heath.com/t/osc-commands-qlab/9688/9 "2024-09-19T10:41:26Z")
OSC support is required for Avantis and dlive. If it becomes integrated with QLab, Max, Lemur and touchOSC, it will be a very good mixing console. ---
**Author:** ![lgmorley](https://avatars.discourse-cdn.com/v4/letter/l/7cd45c/32.png) [@lgmorley](https://forums.allen-heath.com/u/lgmorley)\ **Post date:** [19 August 2025 23:39 UTC](https://forums.allen-heath.com/t/osc-commands-qlab/9688/10 "2025-08-19T23:39:50Z")
Hello Nic, Is there a reason as to why Allen and Heath won’t implement OSC support. I find it much easier to implement with the more human friendly sintax. OSC has become an industry standard in the theatre world for this reason- especially as show automation becomes more complex using programs like QLab