# PA28 Legacy Mixer - Parametric EQ

**URL:** <https://forums.allen-heath.com/t/pa28-legacy-mixer-parametric-eq/31459>\
**Category:** Other A&H Products\
**Created:** [11 March 2026 12:04 UTC](https://forums.allen-heath.com/t/pa28-legacy-mixer-parametric-eq/31459 "2026-03-11T12:04:27Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![bcain](https://avatars.discourse-cdn.com/v4/letter/b/46a35a/32.png) [@bcain](https://forums.allen-heath.com/u/bcain)\
**Post date:** [11 March 2026 12:04 UTC](https://forums.allen-heath.com/t/pa28-legacy-mixer-parametric-eq/31459/1 "2026-03-11T12:04:27Z")

</div>

What should be the default settings on the Mains parametric EQ? Reason being is that I have a 16 band EQ running through the inserts and don’t want to over EQ the system.

---

<div class="post-metadata">

**Author:** ![bcain](https://avatars.discourse-cdn.com/v4/letter/b/46a35a/32.png) [@bcain](https://forums.allen-heath.com/u/bcain)\
**Post date:** [11 March 2026 12:29 UTC](https://forums.allen-heath.com/t/pa28-legacy-mixer-parametric-eq/31459/2 "2026-03-11T12:29:59Z")

</div>

Never mind. Just answered my own question after looking at the block digram. L/R Inserts only feed the Main Outs L/R outputs, not the A/B outs. Parametric is only used on the A/B outs. So now I have to make a choice.