# Remote shut down/start up **URL:** \ **Category:** Avantis General Discussions\ **Created:** [21 August 2025 18:52 UTC](https://forums.allen-heath.com/t/remote-shut-down-start-up/29391 "2025-08-21T18:52:01Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![kylan](https://avatars.discourse-cdn.com/v4/letter/k/ce73a5/32.png) [@kylan](https://forums.allen-heath.com/u/kylan)\ **Post date:** [21 August 2025 18:52 UTC](https://forums.allen-heath.com/t/remote-shut-down-start-up/29391/1 "2025-08-21T18:52:01Z")
I am looking for a network solution to remote shut down of board. Thanks! ---
**Author:** ![jyradelix](https://avatars.discourse-cdn.com/v4/letter/j/a9adbd/32.png) [@jyradelix](https://forums.allen-heath.com/u/jyradelix)\ **Post date:** [19 September 2025 15:32 UTC](https://forums.allen-heath.com/t/remote-shut-down-start-up/29391/2 "2025-09-19T15:32:48Z")
I would like to +1 this one. I can see some instances where I may not be in front of the console but need to cut power and want to make sure the board is in a safe state. There are also situations where integration into a broader system control setup (ie: Q-Sys or other management tooling) would be useful. ---
**Author:** ![dshriver31](https://sea2.discourse-cdn.com/flex002/user_avatar/forums.allen-heath.com/dshriver31/32/7296_2.png) [@dshriver31](https://forums.allen-heath.com/u/dshriver31)\ **Post date:** [29 September 2025 13:07 UTC](https://forums.allen-heath.com/t/remote-shut-down-start-up/29391/3 "2025-09-29T13:07:01Z")
This is a much needed feature for the install market. I often want to put the console on power modules that are sequenced and controlled by a control system (Crestron, QSC, Extron, etc). This allows users to have a one button control to turn on and off the entire system. For education and house of worship markets, if I don’t control the power the console typically gets left on forever. If I do control the power, then the system is not shut down correctly.