# Switch Mix output to Back panel from D-snake

**URL:** <https://forums.allen-heath.com/t/switch-mix-output-to-back-panel-from-d-snake/11322>\
**Category:** Qu Troubleshooting\
**Created:** [29 August 2021 01:40 UTC](https://forums.allen-heath.com/t/switch-mix-output-to-back-panel-from-d-snake/11322 "2021-08-29T01:40:07Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![theobell](https://avatars.discourse-cdn.com/v4/letter/t/b5e925/32.png) [@theobell](https://forums.allen-heath.com/u/theobell)\
**Post date:** [29 August 2021 01:40 UTC](https://forums.allen-heath.com/t/switch-mix-output-to-back-panel-from-d-snake/11322/1 "2021-08-29T01:40:07Z")

</div>

Hey Everyone,

Im just wondering about how i can switch my mix outputs from the D-snake to the outputs on the back panel?

the console is much closer to the monitor position then the dsnake is

---

<div class="post-metadata">

**Author:** ![steffenromeiss](https://sea2.discourse-cdn.com/flex002/user_avatar/forums.allen-heath.com/steffenromeiss/32/2684_2.png) [@steffenromeiss](https://forums.allen-heath.com/u/steffenromeiss)\
**Post date:** [29 August 2021 08:25 UTC](https://forums.allen-heath.com/t/switch-mix-output-to-back-panel-from-d-snake/11322/2 "2021-08-29T08:25:53Z")

</div>

no need to switch, on the QU all local outputs carry the signal they are labelled with