# Touch screens are slow to respond when selecting a channel after firmware update

**URL:** <https://forums.allen-heath.com/t/touch-screens-are-slow-to-respond-when-selecting-a-channel-after-firmware-update/31548>\
**Category:** dLive Troubleshooting\
**Created:** [23 March 2026 14:08 UTC](https://forums.allen-heath.com/t/touch-screens-are-slow-to-respond-when-selecting-a-channel-after-firmware-update/31548 "2026-03-23T14:08:20Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![FWjknight](https://avatars.discourse-cdn.com/v4/letter/f/85e7bf/32.png) [@FWjknight](https://forums.allen-heath.com/u/FWjknight)\
**Post date:** [23 March 2026 14:08 UTC](https://forums.allen-heath.com/t/touch-screens-are-slow-to-respond-when-selecting-a-channel-after-firmware-update/31548/1 "2026-03-23T14:08:20Z")

</div>

Running a dLive S7000 connected to DM64 via 2x RJ45 lines. Just updated to the 2.12 firmware last week and have noticed a significant delay when pressing select on a channel to when it populates on the touchscreens. The delay appears to be specifically when going between channel banks as channel selection inside one bank is normal. However, when selecting a channel in a different bank there is ~5 seconds of delay before it appears on the touch screen. Audio is unaffected, seems to be a graphical issue only, but it is problematic.

Has anyone else noticed this?

Edit: I forgot to point out that I have another S7000 connected to a DM0 that is experiencing the exact same problem. Both updated at the same time.

---

<div class="post-metadata">

**Author:** ![duplobaustein](https://avatars.discourse-cdn.com/v4/letter/d/6bbea6/32.png) [@duplobaustein](https://forums.allen-heath.com/u/duplobaustein)\
**Post date:** [23 March 2026 17:40 UTC](https://forums.allen-heath.com/t/touch-screens-are-slow-to-respond-when-selecting-a-channel-after-firmware-update/31548/2 "2026-03-23T17:40:08Z")

</div>

I have noticed such delays when switching scenes. Was definitely not the case prior 2.10.