Hello,
on a show yesterday, i leveled a DI Bass Singnal narrow 0db by fader and preamp and send it to a mix group. But the signal “arrives” the mix with -10 db.
I checked everything up and up again,but i cant find a problem. It was not a classic pre or post fader problem and I’am not a newby.
On the SQ block diagramm i can see a “level” posibillity after the fader for the mix. I can’t find it anymore.
Please help me. The next show is comming on saturday.
Thanks a lot
Compression and EQ May Change the Level?have you taken that into Account?
Best Regards,
Tobias
Hey Tobi,
Thanks for your answer. I forgot to say that every Dynamics or EQ aren’t activated on channel and mix buss.
After I’ve read some interesting posts, maybe the ‘pan law’ can be the problem, but I can’t find out how A&H handle it. But for this it have to be 3 or 4 dB lower not 10.
Thank’s
On the SQ block diagramm i can see a “level” posibillity after the fader for the mix. I can’t find it anymore.
That LEV is the fader for the mix. Fader in the block diagram means the channel fader, which is followed by pre/post ooutputs.
Maybe have a DCA activated?