# ZED spare fader & rotaries knobs

**URL:** <https://forums.allen-heath.com/t/zed-spare-fader-rotaries-knobs/13190>\
**Category:** Other A&H Products\
**Created:** [1 May 2023 05:03 UTC](https://forums.allen-heath.com/t/zed-spare-fader-rotaries-knobs/13190 "2023-05-01T05:03:41Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![slacknote](https://avatars.discourse-cdn.com/v4/letter/s/919ad9/32.png) [@slacknote](https://forums.allen-heath.com/u/slacknote)\
**Post date:** [1 May 2023 05:03 UTC](https://forums.allen-heath.com/t/zed-spare-fader-rotaries-knobs/13190/1 "2023-05-01T05:03:41Z")

</div>

I would like to do some light modding on my ZED-428 by getting some fader (and perhaps) rotary knobs in different colours.  
Any tips on where to get these?

---

<div class="post-metadata">

**Author:** ![mikec](https://avatars.discourse-cdn.com/v4/letter/m/977dab/32.png) [@mikec](https://forums.allen-heath.com/u/mikec)\
**Post date:** [1 May 2023 20:35 UTC](https://forums.allen-heath.com/t/zed-spare-fader-rotaries-knobs/13190/2 "2023-05-01T20:35:14Z")

</div>

It was for their larger format mixers but at one I think A&H had fader caps available.

Here’s quite a few choices, you’ll need to measure fader arm.  
[https://www.amazon.com/s?k=mixer+fader+caps&hvadid=634086954658&hvdev=c&hvlocphy=9015758&hvnetw=g&hvqmt=b&hvrand=11224821731619157640&hvtargid=kwd-356276446984&hydadcr=29009\_14670955&tag=googhydr-20&ref=pd\_sl\_sa3sy9q9a\_b](https://www.amazon.com/s?k=mixer+fader+caps&hvadid=634086954658&hvdev=c&hvlocphy=9015758&hvnetw=g&hvqmt=b&hvrand=11224821731619157640&hvtargid=kwd-356276446984&hydadcr=29009_14670955&tag=googhydr-20&ref=pd_sl_sa3sy9q9a_b)