# Zedi10fx not powering on **URL:** \ **Category:** Other A&H Products\ **Created:** [19 March 2026 23:26 UTC](https://forums.allen-heath.com/t/zedi10fx-not-powering-on/31517 "2026-03-19T23:26:10Z")\ **Posts on this page:** 8\ **Page:** 1
**Author:** ![jshire](https://avatars.discourse-cdn.com/v4/letter/j/77aa72/32.png) [@jshire](https://forums.allen-heath.com/u/jshire)\ **Post date:** [19 March 2026 23:26 UTC](https://forums.allen-heath.com/t/zedi10fx-not-powering-on/31517/1 "2026-03-19T23:26:10Z")
Hi, very lightly used Zedi10fx & today it turned off on its own. Other things connected to the same power circuit didn’t glitch or go off, as would normally happen if there had been a power surge, so not sure what happened. Have checked the fuse in the plug cable & that is ok & have also tried plugging it in with a different cable & different power outlet. I’m guessing the advice could be that something internal has blown. Any advice on checking / sorting it out? Thanks. ---
**Author:** ![mikec](https://avatars.discourse-cdn.com/v4/letter/m/977dab/32.png) [@mikec](https://forums.allen-heath.com/u/mikec)\ **Post date:** [20 March 2026 00:15 UTC](https://forums.allen-heath.com/t/zedi10fx-not-powering-on/31517/2 "2026-03-20T00:15:12Z")
Maybe check the power cord with a meter for continuity end to end. With all else checked it’s most likely the power supply module, I’ve a changed a couple on ZED mixers. Full Compass has them listed but not in stock. How old is it? ---
**Author:** ![jshire](https://avatars.discourse-cdn.com/v4/letter/j/77aa72/32.png) [@jshire](https://forums.allen-heath.com/u/jshire)\ **Post date:** [20 March 2026 09:23 UTC](https://forums.allen-heath.com/t/zedi10fx-not-powering-on/31517/3 "2026-03-20T09:23:47Z")
Thanks. I’ve had it about 4 years but it’s actually only been used perhaps 10 or so times, as it was purchased as a second unit. Is it is an easy job if it is the power module? ---
**Author:** ![jshire](https://avatars.discourse-cdn.com/v4/letter/j/77aa72/32.png) [@jshire](https://forums.allen-heath.com/u/jshire)\ **Post date:** [20 March 2026 09:26 UTC](https://forums.allen-heath.com/t/zedi10fx-not-powering-on/31517/4 "2026-03-20T09:26:46Z")
i’m in the UK also, so Full Compass isn’t an option if I need to purchase a replacement module. I’ve read elsewhere online that sometimes the internal fuse can go, but also that opening the mixer up isn’t a good idea due to risk of residual power shocks. Any ideas on that? ---
**Author:** ![jshire](https://avatars.discourse-cdn.com/v4/letter/j/77aa72/32.png) [@jshire](https://forums.allen-heath.com/u/jshire)\ **Post date:** [31 March 2026 18:21 UTC](https://forums.allen-heath.com/t/zedi10fx-not-powering-on/31517/5 "2026-03-31T18:21:07Z")
Update; I emailed both H&A head office & their UK after-sales service address & not had any reply. Not even an acknowledgement of the emails. ---
**Author:** ![SQuser](https://sea2.discourse-cdn.com/flex002/user_avatar/forums.allen-heath.com/squser/32/1200_2.png) [@SQuser](https://forums.allen-heath.com/u/SQuser)\ **Post date:** [31 March 2026 18:33 UTC](https://forums.allen-heath.com/t/zedi10fx-not-powering-on/31517/6 "2026-03-31T18:33:39Z")
> [@jshire](#): > > H&A head office Perhaps you mixed up some letters too. 😉 Maybe try this link: [https://support.allen-heath.com/hc/en-gb/requests/new?ticket\_form\_id=360001516878](https://support.allen-heath.com/hc/en-gb/requests/new?ticket_form_id=360001516878) ---
**Author:** ![jshire](https://avatars.discourse-cdn.com/v4/letter/j/77aa72/32.png) [@jshire](https://forums.allen-heath.com/u/jshire)\ **Post date:** [31 March 2026 19:24 UTC](https://forums.allen-heath.com/t/zedi10fx-not-powering-on/31517/7 "2026-03-31T19:24:31Z")
yes, meant A&H - typo ---
**Author:** ![AllanNicholl](https://avatars.discourse-cdn.com/v4/letter/a/b782af/32.png) [@AllanNicholl](https://forums.allen-heath.com/u/AllanNicholl)\ **Post date:** [31 March 2026 22:12 UTC](https://forums.allen-heath.com/t/zedi10fx-not-powering-on/31517/8 "2026-03-31T22:12:44Z")
Hate to be the bearer of bad news - had the same thing on the same mixer - replacing internal power supply at authorised A&H service centre - £140