Thanks Keith, for listening.
I have already created a post in Suggestions — Additional Mixer Configuration
The Post suggests creating a separate configuration or firmware install for AMM. SQis Very flexible and configurable because of the FPGA use.
Master, Listen and add AMM.
Depending on NVRAM, a separate configuration could be created for AMM users thereby devoting maximum mixer resources to Speech production needs, conference, theatre etc.
A second configuration would be devoted to Sound Production / Sound Reinforcement. Again devoting maximum resources to Sound. Without AMM more Sound feature additions would be possible and vice versa.
If That cant be done because of lack of NVRAM to store an additional configuration, It could be dome by creating a separate Firmware load for each use. Again maximizing the usability for each type of show or mixer need.
Thanks for listening
Mike
That should allow for more configuration and in my case, the Post Insert / Pre EQ Aux take-off point I lost in the Firmware upgrade.