I have an ME-U with dante card and cannot get the channel names to populate off the SQ-7 or dante controller. The GUI is non accessible either to manually enter channel names due to IP address getting changed and cant figure out how to do a hard reset on the ME-U back to factory settings
To reset the network settings on the ME-U, there should be a small recessed RESET button by the network port.
Hi @Andy_Strebel
Unfortunately channel names don’t populate to ME devices via Dante - but you can enter channel names in the ME-U (default IP is 192.168.1.40)
As @ShadowSound has kindly pointed out, you’ll likely want to do a network settings reset by pushing & holding the reset button whilst powering the device on. You’ll need a relatively long, thin pointed object as the button is quite recessed.
Any trouble, please contact us at support.allen-heath.com
All the best