Does anyone know how to flip plarity of an output Channel (Metrix) of Avantis Console? This is soo annoying. Such important features are difficult to find.
Thanks a lot for Help in Advance.
Priyan
There is no polarity invert on any outputs only inputs
Touch the output socket number in the I/O screen to access output polarity.
Mentioned in the reference guide here - https://www.allen-heath.com/content/uploads/2023/11/Avantis-Firmware-Reference-Guide-V1.30.pdf#page=22&zoom=auto,-411,34
1 Like
I realize it might not be intuitive to use the routing screen to access settings like this on the I/O. But once you realize this feature exists, it makes the most sense that A&H put this functionality where they did. The routing screen is the one place you can access every input and output regardless of how your system is setup.
That being said, one line in the reference manual - especially without a corresponding image - is easily overlooked. It would be great if A&H added a screenshot of this output popup to the reference manual like they have for other settings (like the ME stereo link setting). Honestly a screenshot of the input popup would be nice too!
While there is a screenshot of the routing page, there isn’t one of the actual popup screen that shows when you click on an input/output (at the top of the routing page).
The screenshot of the popup screen that is shown in that section of the firmware guide is related to the ME system and therefore has different settings than what the inputs and outputs would show.