I was preparing scenes for a festival, but in the scenes I can not save and recall the settings of the channels set in stereo mode.
It seems that this parameter is not saved in the scenes. it’s possible??
I verified that there were no blocks on the recall safe page, but everything seems to be regular …
thank you!!
Hi @diegocaratellivirgilio-it ,
As on page 47 of the reference guide (https://www.allen-heath.com/media/SQ_ReferenceGuide_V1_3_0.pdf#page=47), this is a show level setting. This is because it requires the XCVI core to be rebuilt, which interrupts audio and therefore cannot be changed at a scene level.
We are currently looking into ways to switch between mono/stereo control between scenes.
Thanks!
Keith.
Ok, I hope this feature can be added soon to facilitate the recall of setups in festival situations or recall scenes related to different jobs …
In the meantime, we will use the “old” mode … paper and pen !!!
Thank you.
To get around this I have saved multiple shows and just recall those.
Or on different scenes I make sure to use the same input channels for my stereo inputs: scene 1, input 1/2, is my electric guitar but on scene 2, input 1/2 is a computer audio line.