Struggling with Aux Fed subs

[4mal]

Please take the time to visit the CQ Suggetions forum. Please UP Vote my suggestions fpr

1. Linking an aux volume slider position to the position of the Master
2. Selectable, steeper LPF and HPF filters. These are also necessary for AUX fed subs

You can also UP Vote my ask for a Reverb where the parameters are accessible. All I really want is one where I can get some of the typical basics like pre- delay.

Link to my request for linking an Aux slider position to that of the master slider

Link the fder level of n AUX Out to the evel of the Master L&R without using a DCa

To maintain the proper balance of AUX Fed Subs with the MasterL&R. Please directly link the fader level of, say AUX 6 to the fader level of the Main LR. It seems like we can use a DCA and use the DCA Master to control the levels of the AUX and Main LR. … but that burns one of too few already DCA’s… Back in UI-24r land I use that a lot! Plese note that this thread is broken out separately from my thread below that combined 2 suggetions.

Here is a link to one of my asks on LPF/ HPF

Variable slopes on High amd low pass filters

For those of us running Aux Fed subs, it would be great to have a finer level of control over the cross over region. On the Ui-24 for instance, you can select 12, 24 or 36 db/octave slopes for the hpf/lpf. This would be a huge help for Aux Fed subs. Note that I am breaking my previous suggestion into 2 separate topocs as suggested in that thread.