Hello,
First, I’m french, sorry for my sad english.
For the next update, i really like to have a fully SAFE option.
possible to SAFE EQ or Gain or Fader or Send etc…
This option is very very important in the digital mixer.
Thank you
Denis
denis
I’d like to see:
-Selectable Layer Link - The option to select which fader bank layers to link. Now, it’s either the layers are linked or unlink across all 3 banks. I’d like to be able to link the layers with Bank 1 and Bank 2, and leave Bank 3 independent.
-Name ACE tie-lines in DualMixRack mode - in Dual MixRack Mode, you have to assign output busses across MixRacks between the slave and master via the numbered ACE “tie-lines”. I’d like to be able to name the ACE channels so that when I go back over to the slave to select which ACE line goes to which output, I’d like to see a name rather than just a number.
[:p]
I know it’s super lazy of me, but I would like to see the ‘libraries’ a little fuller. If I’m doing a quick mix, it would be useful to be able to pull some ‘safe’ compressors, gates, EQs, etc. for toms, voices, basses and the like. Our LS9 is stuffed full of that kind of thing, and, in tight spots, I find it useful.
www.pianojam.nl
quote:
Originally posted by guyharrisI know it’s super lazy of me, but I would like to see the ‘libraries’ a little fuller. If I’m doing a quick mix, it would be useful to be able to pull some ‘safe’ compressors, gates, EQs, etc. for toms, voices, basses and the like. Our LS9 is stuffed full of that kind of thing, and, in tight spots, I find it useful.
I agree, having some default processing libraries for things like drums, vocals, bass would have been helpful when I was starting on the iLive. I’ve gradually built my own, but on the Yamaha I usually started with theirs and tweaked them. Just faster.
David Schmoldt
quote:
Originally posted by dschmoldtquote:
Originally posted by guyharrisI know it’s super lazy of me, but I would like to see the ‘libraries’ a little fuller. If I’m doing a quick mix, it would be useful to be able to pull some ‘safe’ compressors, gates, EQs, etc. for toms, voices, basses and the like. Our LS9 is stuffed full of that kind of thing, and, in tight spots, I find it useful.
I agree, having some default processing libraries for things like drums, vocals, bass would have been helpful when I was starting on the iLive. I’ve gradually built my own, but on the Yamaha I usually started with theirs and tweaked them. Just faster.
David Schmoldt
Maybe this is something the community here can supply for newer users?
All you would need to do is set up an xml file of your favorite settings and just upload it somewhere and link to it on the forums.
112T/IDR48/IDR16
It would be good to see which other users are online at any given time. I don’t know if there is an interface to the ‘server / router’ function through HTML, but I certainly haven’t found it (and I’ve tried.)
G
www.pianojam.nl
Hi, if it’s possible for the future’s update, to have dynamique on FX return… it’s cool for live mix…
denis
quote:
Originally posted by spartHi, if it’s possible for the future’s update, to have dynamique on FX return… it’s cool for live mix…
Qe? DFX? https://www.ilive-digital.com/Downloads/iLive%20Reference%20Part%202%20Firmware%20AP6526-2_4.pdf Page 34.
iLiveT80 / iDr32
you can also use a usual strip as a FX-return to have full processing.
just patch it at the preamp…
greetings from hamburg
quote:
Originally posted by HectorCokai’d like to insert graphic EQ in input channels!!!
PLEASE A&H!
thanks.
Hi All, Just purchased a iDR-32 Mix Rack after a lot of thought and using it with Motion Tablet LE1700. Looking forward to the first gig next weekend…
Anyway now I actually own a Mix Rack I feel that entitles me to make a suggestion [
]… I like to see the idea that HectorCoka had some time ago or a variant of for frequency conscience compression. I tend to prefer a graphic over PEQ for this.
Another option that might work is if a mono sub group could chosen in the compressor side chain drop down menu then the GEQ on the sub group used to control the compressor (obviously this sub group would off in the main mix).
Cheers,
Gary.
Gary.
iDR-32
Motion Computing LE1700
iPad - sometime soon
I would like the Editor to prompt you to save a show if it has been modified (like nearly every other program on the planet) to avoid the dozy gits amongst us just clicking it shut and losing a load of work!
cheers,
Marc
More Stage Services
The Hague - Holland
iLive 144 - R-72 - iDR10 - iDR16
In the preferences it would be good to have more options for the channel encoders primary/Rotary Shift global settings. In particular I would like to see the Blend control (LCR plus mode)able to be the primary function (PAN as rotary shift). Perhaps other options like SUB for example (LR Sub mode)for the primary encoder function - or is that there already? can’t remember.
Cheers
Richard Howey
Audio Dynamite Ltd
IDR48/IDR16/T112/R72
hey editor on ipad?
https://www.wyse.com/products/software/pocketcloud/index.asp
cheers
dave
allen&heath iLive-144 /idr 64 / idr 48 (i am convinced there is a yamaha conspiracy against the release of the dante )
quote:
In the preferences it would be good to have more options for the channel encoders primary/Rotary Shift global settings. In particular I would like to see the Blend control (LCR plus mode)able to be the primary function (PAN as rotary shift). Perhaps other options like SUB for example (LR Sub mode)for the primary encoder function - or is that there already? can't remember.
Hi Stix,
The reason these options are not available is that the LCD display doesn’t have the correct legends on the lower “eyebrow” display for Blend & Sub, and we have the rotary shifted function always on the upper “eyebrow”, otherwise we think it would confuse the user (inverting the shift fn).
Antony Jackson
Software Manager
Allen & Heath Limited
again (not shure if i mentioned it before) resizable scene window in editor.
cheers
dave
allen&heath iLive-144 /idr 64 / idr 48 (i am convinced there is a yamaha conspiracy against the release of the dante )
quote:
Originally posted by antonyjaquote:
In the preferences it would be good to have more options for the channel encoders primary/Rotary Shift global settings. In particular I would like to see the Blend control (LCR plus mode)able to be the primary function (PAN as rotary shift). Perhaps other options like SUB for example (LR Sub mode)for the primary encoder function - or is that there already? can't remember.Hi Stix,
The reason these options are not available is that the LCD display doesn’t have the correct legends on the lower “eyebrow” display for Blend & Sub, and we have the rotary shifted function always on the upper “eyebrow”, otherwise we think it would confuse the user (inverting the shift fn).
Antony Jackson
Software Manager
Allen & Heath Limited
Thanks Antony - Yeah I thought that the display might be the reason - The other option would be to have a latchable Rotary Shift button - But then there’s no indication LED on the Button! It’s a real problem for a show I’m working on where I need to crossfade actors between a centre cluster (middle of room) and an end stage (Stereo mix). With actors moving around its now a “One at a time” adjustment as one hand has to stay on the Rotary Shift. I’m using scenes as much as possible but it’s not ideal. Any suggestions?
Cheers
Richard Howey
Audio Dynamite Ltd
IDR48/IDR16/T112/R72
I want the ablity to connect two surfaces while using dual mix racks. I have the open ACE spot on my main IDR, on my ACE card, I know I would have to run another piece of cat5 to the second surface, but that would be my one Ilive dream.
Chad
Hi,
-
Scenes should be able to recall library items. For example let’s say you have a PEQ store in the library for your lead vocal. During sound check, you need to make a change to that PEQ setting for whatever reason. By simply updating this change in the library, the change should be reflected by all the scene recalls which use this library entry. (Change once, apply to many)
-
How about a sensitivity control for the RTA? This would be helpful when ringing out wedges.
-
When configuring the sources to a Matrix, the ON indicators should not be visible on sources, such as chanels, which are not routable to the Matrix. This issue occurs in both the surface and editor.
Been using the system (T112/32) for 6 months now. I LOVE IT!
I’d love the ability to use the built in VGA connector on the back of the surface to act as an extended control display screen, so as to display extra info, an extended desktop with the USB control for touch interface too?
Some extra adjustment in the built in FX delays as I need more that the allowable 1362ms available, over 1800 would be fantastic!
Thanks
Avenue Services: Audio Visual Provision
T112 & IDR-48 + iPhone and hopefully iPad software!
So I’m looking into the iLive system for Church and as far as I’m concerned, it is the best system out there.
As for an idea that I’m sure software should be able to do, which I assume it can’t currently (have heard of it), is using the 8 softkeys as layer selects.
eg.
R72 current max I/O = 72, add 8 softkeys @ 12 faders each = max I/O of 168
T80 current max I/O = 80, add 8 softkeys @ 20 faders each = max I/O of 240
T112 current max I/O = 112, add 8 softkeys @ 28 faders each = max I/O of 336
By allowing the use of those soft keys as faders selects, for major productions, this could make the whole system even more wanted (I do realize the r72’s might shoot up a bit and the t112’s down, but not that much as thats a lot of channels for only 12 faders so just not as easy to get to them compared to the t112, but for someone who’s used to it…no problems)
All this would take is allowing the softkeys to have the same options/code as the current layer selects. I doubt it would be too difficult…and its not like a user has to use them…but if someone needs to expand there board beyond where it can go currently, this update could be very handy!
Something else that I have no experience in though…I’ve got no idea how lighting controllers work, but the interface seems to be very similar from a few that I’ve seen. Would it be possible to have some new cards for the iDR10 that allows inputs for room lighting? With scene selection, you could map the lighting settings to match your scene selects (but of course fairly basic). I know that would be out of the usually A&H products…but the surface is just a surface…its the card (or even a whole new rack) that controls the lights…just a thought…
and last thing…which I did already lol…on the mac version of the editor, make an icon for the program to look like like the ilive 
it looks so much better then the standard apple new program icon. Heres the link to the t80 pic I converted (towards the bottom of the page): https://web.me.com/yeshua11/Joshs_Website/Extras.html
my iLive setup:
offline editor on mac, demo content on ipod touch
lol