I had to replace the battery on my computer. My model had a holder you can pop the battery out and put in a new one. I restart the unit, but I just get the white screen. I am tried hooking up and external screen and I get no output to the external screen. Any hints on what to try next?

I saw that post, but when I hold down the delete key on the USB keyboard or the F8 or F2 nothing happens. I don’t get any image out to the external monitor. I cannot get a bios screen at all. There is power getting to the internal computer and when the iLive surface is powered up, I see the network…

I would imagine if I plugged in a usb keyboard I would get power to the keyboard and the num lock and cap lock lights would come on. I don’t seem to be getting any power out even though I know there is power getting to SBC. It seems like the SBC needs to be turned on.

Ugh. Suddenly I’m in the same boat. After taking apart and reassembling my T112, my SBC seems to not work at all, like you said, no power to the USB keyboard and no signal to the monitor. I thought the exact same thing - it felt like the SBC needs to be turned on. I’m wishing I hadn’t fixed what was…

Can you let me know which SBC you have? When I repaired mine I had to use one of the pins on the SBC to start the computer part of it. It’s essentially the same as a motherboard header on a reguar desktop PC board.

If you’ve got the Fujitsu board then have a look for the Front Panel Connector, on mine I needed to short pins 8 & 6 together & that booted the SBC. After that it’s a case of going into the bios & putting att the settings back to where they should be. [Screenshot-2024-09-11-at-03.46.36.jpg]

Here is my computer. I think it is a Fujitsi but more updated.

I think my computer is a Fujitsi. Possibly a newer one. Here is a picture. [IMG_6353-scaled.jpg]

Dewey - that is the Fujitsu SBC. Try what fender_jazz_72 recommended. I have the Axiomtek 1.5Ghz SBC. Is there any info on trying to get mine to boot up? I got through a weekend festival with no SBC by using my laptop and the new Mixing Station iLive app. It was rough but I got through it.

Surely I can make it through using the Edit software and mixing station, but you can do any reconfiguring of the surface without the computer working.

T112. Can't get external screen to work. White Screen of death

iLive iLive Troubleshooting

wowc 30 January 2025 13:48 21

Here’s the full process explained. I made this as a PDF so it could be printed and kept near the mixer.